Above Ground Installation

At Wireless Fences 4 Less, we want to deliver a wide variety of quality wireless fences to all our valued customers. We are proud to introduce a product made with the latest breakthrough in technology to give total ease in underground fencing.

Gone are the days when walls, wooden fences and other conventional methods of containment have kept pets in their proper places but have occupied a lot of space, and some made an unsightly mess. Now, in the age of technology and scientific discoveries, we welcome newly developed, advanced dog wireless fences that will revolutionize the face of pet containment. With our offered wireless fences, dog owners'll no longer have to use protective gates, or get tired of carrying the dog away from that restricted area.

A common misconception about underground fencing is that they need to be buried. That impression should not be taken in general. Although there are still instances wherein burying the wire is preferrable, for ordinary yards, owners can be saved from the hassles and dirt of digging and burying.

With this new interesting product, owners can now forget all the hesitations in buying dog wireless fences, especially an underground containment.

Through above ground installation, the underground fence is a perfect, hassle-free solution to all installation problems! With the wire securing staples, it can be installed above ground in only a matter of an hour or two. Within a matter of 7 - 14 days the root system of the lawn will grow over the wire, sink it and hide it completely from view.

Below are the steps for above ground installation:

Step 1:

» First lay out the boundary wire in the desired shape and around the area owners want to contain. From the boundary wire run twisted wire to the transmitter and pug it in.
» Once owners have decide the system owners chose is correct for owners, "Staple" the twisted wire to the ground by hammering in a wire "Staple" every 5 - 6 feet.
» Now stop and look at the wire. Is it completely flush to the ground all the way to the start of the boundary? The wire MUST completely touch the ground. If not go and "Staple" any raised areas before proceeding to the next step.

Step 2:

» Place a "Staple" where the twisted wire and the beginning of the boundary meet (if owners have a splice in this area please dig a small hole about 2 inches deep and bury the splice. Then place a "Staple" in the front of and behind the splice to relieve any pressure on the splice)
» Next, walk to the first corner of the boundary and "Staple" it to the ground. Repeat this step for all corners of the boundary. (Not all yards are square if owners do not have corners on the boundary please select multiple anchor points for the wire)
» Now place staples as needed and make sure to staple any raised areas down until they are completely flush with the ground, for maximum safety for owners and the guests.

 

 

View Cart Checkout
0 items in your cart
 
Image(s) may not reflect the product(s) being sold.
New Customer Service Hours:
Mon - Th: 9:00am - 11:00pm EST
Fri-Sun: 9:00am - 7:00pm EST
If you have any questions just give us a call:
**UNLIKE OUR COMPETITION WE HAVE NO HANDLING FEES OR HIDDEN CHARGES**